Volume 43, Number 2, 2007

ISSN: 0004-881X
Application of Secondary Ion Mass Spectrometry in Studies of Niobium Segregation in Niobium-Doped Titanium Dioxide
L.R. Sheppard, A.J. Atanacio, T. Bak, J. Nowotny, and K.E. Prince
Nano-Mechanical Properties of Hydroxyapatite Coatings with a Focus on the Single Solidified Droplet
K.A. Gross and S. Saber-Samandari
A New Solid State Synthesis Methodology for Ternary and Higher Order Compounds
D. P. Riley, and E.H. Kisi
Quantitative Assessment of Stress Fields in Ceramic and Semiconductor Materials in the Scanning Electron Mircoscope
Giuseppe Pezzotti, Alessandro Alan Porporati, Andrea Leto and Wenliang Zhu
Material Characteristics That Have the Greatest Influence on the Survival of Refractory Anchorage Systems
Paul Plater, Graham Quigley
TiO2Thick Films by Anodic Oxidation
H.Z. Abdullah, and C.C. Sorrell
Comparative assessment of medium-term properties and performance of fly ash and metakaolin Geopolymer systems
T.J. Brown, K.K. Sagoe-Crentsil, A.H. Taylor
Spark Plasma Sintering of X-Sialon
G. C. Barris, Z. Shen and M. Nygren
Management of Materials Research: Protection and Commercialisation of Nanotechnology
Michelle Hedges,Partner
La0.9Sr0.1Ga0.57Mn0.43O3 Anode Ceramics of Solid Oxide Fuel Cells Produced Using Reaction-Sintering Process
Yi-Cheng Liou, Pei-Hung Yeh, Ming-Jih Lin
Autoclaved Lime-Colloidal Silica Slurries and Formation of Al-Tobermorite
H. Connan, A.S. Ray and P.S. Thomas
A Critique of the Design Strength of Glass In AS 1288 and Determination of a Rationally Deduced Value
Leon Jacob and Nathan Munz
A Data-Constrained Computational Model for Morphology Structures
Y. S. Yang, A. Tulloh, I. Cole, S. Furman and A.Hughes
Toward the Development of High Performance, Frequency Agile, RF/Microwave Dielectric Ceramics Based on Nanoscale Structural Analysis
Y. Liu, R.L. Withers, B.Nguyen and X.Y. Wei
An Indirect Implicit Model For Frequency Dependent Hystereses of Piezoelectric Ceramics
H. Man, T. Furukawa, M. Hoffman, S. Imlao and Z. H. Lou
Radioisotope Tracing of Knee Implant Wear
Laura G. Gladkis , Luiza Haberska, Jennie Scarvell, Paul Smith, Heiko Timmers


A/Prof. B. Ben-Nissan
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia

Dr. W. R. Vance
Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation

Guest Editor

Dr A. H. Choi
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia

Associate Editors

Prof. Tadashi kokubo
Department of Material Chemistry. Kyoto University, Japan

Prof. Wolfgang H. Muller
Techniche Universitat Berlin, Germany

Prof. Giuseppe Pezzotti
Department of Materials Kyoto Institute of Technology, Japan

Prof. Akiyoshi Osaka
Department of Bioscience and Bioengineering Okayama University, Japan

Dr Gregory L. Heness
Department of Chemistry, Materials and Forensic Science, University of Technology Sydney, Australia

Prof. Michael V. Swain
Division of Biomaterials, University of Sydney, Australia

Dr Dan Perera
Institute of materials engineering, Australian Nuclear Science and Technology Organisation


No part of this publication may be reproduced, displayed, stored in a retrieval system, or transmitted in any form or by any means of electronic, optical, magnetic tape or devices, photocopying, recording or otherwise, without the permission in writing from the Australian Ceramic Society Federal Secretary.