Volume 48, Number 1, 2012

ISSN: 0004-881X
1. Load Transmission to Die Components During Ceramic powder Die-Pressing
M. Yousuff, R.G. O’Donnell
8 Hydrothermal Synthesis of Tobermorite Doped with Phosphorus Species for Removing Heavy Metal Ions
H. Maeda, Y. Ogawa, E. H. Ishida, T. Kasuga
12 Preparation of Nanocrystalline ZrO2 Powder via A Chemical Route
Rifki Septawendar, Suhanda Sutardi, Bambang Sunendar Purwasasmita, and Frank Edwin
21 Tribology of Silicon Based Nitride Ceramics
Mark I Jones, H Hyuga, Kiyoshi Hirao, Yukihiko Yamauchi
38 Negative Voltage Electrospinning of Fibrous Nanocomposite Scaffolds for Bone Tissue Engineering
H.W. Tong and M. Wang
44 Raman and Photoreflectance Study of InAs Quantum Dots on GaAs(100) Substrates Subjected to An In-Situ
H. Morales-Cortés, C. Mejía-García, J. S. Rojas-Ramírez, I. Martínez-Velis, R. Contreras-Guerrero, M. Ramírez-López, A. M. Paniagua-Mercado and M. López- López
50 Effect of Fe2O3 as a Dopant in the Transformation of αAl2O3 from Activated Gibbsite on the Nanocrystalline αAl2O3Preparation
Rifki Septawendar, Suhanda Sutardi, Apriani Setiati dan Naili Sofiyaningsih
59 Piezoelectric Properties of BaTiO3 Ceramics Prepared by Spark Plasma Sintering
H. Maiwa
64 Optical and Electrical Properties of Al2O3 Films Grown by Aerosol Deposition
Y. Uemichi, J. Takino, K. Nishikawa, Y. Sato and S. Yoshikado
69 Conformality of ceramic oxygen barrier coatings on micro- and nanoscale features by Pulsed- Pressure MOCVD
Susan Krumdieck
80 Effects of Fuel Concentrations and Calcination Temperatures on the Compositions and Particle Sizes of YBa2Cu3O7-x Superconductors Synthesized by the Solution Combustion Technique
Oratai Jongprateep and Kawin Tanmee
85 Influences of Chitosan Addition to Morphology and Particle Size of Yttrium Stabilized Zirconia (YSZ) Nanoparticle for Dental Bridge Application
Bambang Sunendar Purwasasmita, Heru Hermawan, and Rifki Septawandar
90 Characteristics of Alteration Layers Formed on Simulated HLW Glass under Silica-saturated Solutions
T. Maeda, K. Hotta, H. Usui and T. Banba
96 Enhanced Microwave Dielectric Properties of MgTiO3 Ceramics Prepared by Mechanochemical Method
T. Santhosh Kumar, Ajeet Kumar, A. R. James and D. Pamu
102 Effect of Microwave sintering on Structural, Ferroelectric, Dielectric and Mechanical properties of Sm-doped SrBi4Ti4O15 ceramics
Rambabu A. and K. C. James Raju
108 Can Long Term Durability Of Concrete Be Predicted From Accelerated Testing?
Neil B. Milestone
115 A bi-layer glass-coating for low-e property and photocatalytic activity
Qian Gao, Chen-Lu Song and Gao-Rong Han
122 Boron Carbide Ceramics Prepared by Gelcasting and Pressureless Sintering
Dongliang Jiang
128 Hydrogen gas sensing properties of Pt/WO3 thin film in various measurement condition
Yuki Yamaguchi, Yukari Emoto, Tohru Kineri, Masakatsu Fujimoto, Hideo Mae, Atsuo Yasumori and Keishi Nishio
133 Density Correlations Between Green and Fired Ceramic Bodies
R.G. O’Donnell , M. Yousuff and J. Palamara
141 Diamond Composites with Titanium Diboride Bonding Phase Obtained by HP-HT Technique
M. Szutkowska, L. Jaworska, M. Rozmus, B. Królicka


Prof. B. Ben-Nissan
University of Technology Sydney, Australia

Dr. E. R. Vance
Australian Nuclear Science and Technology Organisation

Editorial Assistant

University of Technology Sydney, Australia

Editorial Board

Prof. Tadashi Kokubo
Chubu University, Japan

Prof. Wolfgang H. Muller
Techniche Universitat Berlin, Germany

Prof. Giuseppe Pezzotti
Kyoto Institute of Technology, Japan

Prof. Akiyoshi Osaka
Okayama University, Japan

Prof. Michael V. Swain
University of Sydney, Australia

Dr O. Standard
University of Sydney, Australia

A/Prof. Gutekin Goller
Istanbul Technical University, Turkey

Prof. Razi Vago
University of Nrgev Beer Sheva, Israel

Prof. Mark Hoffman
University of New South Wales, Australia

Dr David W. Green
University of New South Wales, Australia

Prof Chris C. Sorrell
University of New South Wales, Australia

Prof. Christopher. Berndt
Swinburne University of Technology, Australia

Prof. Sunil Kunar
University of South Austraila

Dr Gregory L. Heness
University of Technology Sydney, Australia

Dr. Paul Thomas
University of Technology Sydney, Australia

Dr Joshua Chou
University of Technology Sydney, Australia


No part of this publication may be reproduced, displayed, stored in a retrieval system, or transmitted in any form or by any means of electronic, optical, magnetic tape or devices, photocopying, recording or otherwise, without the permission in writing from the Australian Ceramic Society Federal Secretary.